910 FD Custom shaft = what 913 Shaft

Re: 910 FD Custom shaft = what 913 Shaft

Mat910D3 — Mon, 04 Mar 2013 01:05:02 GMT

[quote user="Gerald T"]

Matt, If the original PX8, 6.5 was tipped an extra 1/2", would that be enough to consider the Diamana D+82X?

Thanks,

[/quote]

I'd say that it would be quite close, the D+ might flight the ball a little lower.

Re: 910 FD Custom shaft = what 913 Shaft

Bradley L — Sun, 03 Mar 2013 02:28:57 GMT

Can't you just order the FD with that same shaft again?

Re: 910 FD Custom shaft = what 913 Shaft

Gerald T — Sat, 02 Mar 2013 20:11:55 GMT

Matt, If the original PX8, 6.5 was tipped an extra 1/2", would that be enough to consider the Diamana D+82X?

Thanks,

Re: 910 FD Custom shaft = what 913 Shaft

Mat910D3 — Fri, 15 Feb 2013 15:03:32 GMT

[quote user="Gerald T"]I was fortunate enough to go through a fitting in Oceanside, CA last spring. I was fit for a 15 degree FD with a Project X-8B4 6.5 shaft, standard length. I can't make it to a regional Titleist fitting centre this spring. Assuming I haven't lost any swing speed over this long winter... Can you tell me what shaft I should consider if I were to get a 15 degree 913FD? Thank you, GT

[/quote]

I'm guessing the stock Diamana D+82 stiff tipped 0.5'' extra to make it in between a Stiff and Extra stiff just like the 6.5 8B4 is. The D+82X is closer in my experience to the 8A4 (7.0) so it might be too much.

I've played a 910Fd 13.5 with 8A4 for the last two years and I now have a 913Fd 13.5 with D+82X (tipped 0.25'' extra) and the shafts are really similar (I prefer the new 913 head tho!). Low spin, tigh feel/dispersion and explosive distance!!

Re: 910 FD Custom shaft = what 913 Shaft

TRIGGITY TRAV — Fri, 15 Feb 2013 03:03:28 GMT

Something Fujikura, probably some sort of motore speeder. I actually have no idea in the characteristics of the Project X-8B4 6.5 shaft. I'm just a big Fujikura fan. I think a project X 6.5 is close to an extra stiff from other companies. I could be wrong though, someone will know better.