Ask Titleist Fitting Expert, Chris Welton your Club Fitting questions...

Hi Ryan,

The Tour Blue 65/75 is an exotic option and will have an upcharge.  An Authorized Titleist retailer will be able to provide pricing. 

Thanks,

Chris

Hi,

Do you guys know if there is any difference between the Vokey TVD K grind, and the new SM5 K grind?

Ryan

Hi Ryan,

Here are some differences between the TVD and SM5 K grinds:

SM5 K grind

-Available in 58, 60

-Bounce is 11 degrees for 58/60, with a slightly wider sole vs TVD K

-TX3 grooves

TVD K grind

-Available in 56, 58, 60

-Bounce is 10 degrees for 58/60

-TVD Shape is a bit rounder with a shorter par height (heel height)

-SM4 grooves (currently)

Thanks,

Chris

Hi there,

 

I am contemplating making a shaft change to my 710 AP2s and I am looking for an opinion.  I currently play the stock DG S300s.  Last Summer, I decided to replace my Vokeys with 3 new SM4s that were shafted with Project X 7.0's (bent 2 degrees flat; fantastic eBay deal that I couldn't pass up).  I absolutely love the feel of the wedges and really hit them solid (carrying a 56 degree close to 110 yards).

 

My issue now is that I don't seem to strike the AP2s all that well anymore.  They are standard loft and lie and I feel like I balloon them (and they just don't feel anywhere near as solid as the Project X  wedges do).  After doing some preliminary research, I was thinking of going to Project X 6.0's in my AP2s.  Any thoughts?

 

I tend to swing a 5-iron between 90-95 miles per hour (5 iron carry around 180-185).  My miss tends to be a pull or a pull-hook.

 

Thanks!

Hi BStew,

In your case, Project X may just fit your swing profile better than DG.   So PX may feel better, but I’m not sure it will fix the spin issue.  If you do decide to re-shaft and there is still too much spin, I would suggest getting the lofts bent a little strong.   Loft will have a bigger influence on spin than most shaft changes. 

I hope this helps!

Chris

Chris,

By a little strong, are you thinking 1 degree?

Thanks for responding - I appreciate the help.

Cheers,
Brandon
Sent on the TELUS Mobility network with BlackBerry

Click to show quoted text

Hi BStew,

I would start at 1 degree.

Thanks,

Chris

Hi,

just had a fitting using Trackman for a set of AP2 714's, tried multiple shafts in the 6 iron (90 mph). DG  S300  launched at 25 degrees with 6000 rpm.  Project x 5.5 launched at 24 degrees with 5400 rpm. KBS C taper  (S) launched at 21-22 degrees with 4800 rpm. Carry distance was 180, 185, 190 in the same order. The C taper is lighter and feels so solid at impact. Can't wait to get them and the snow to go.

Hi, 

Emailed Vokey, and when the SM 5's come out in March TVD lineup will switch to the new grooves. 

Hey fellas. I'm in Nova Scotia and I want to be fit for driver this year. 913 d3 right now. Are there going to be any outdoor fittings this year in Nova Scotia? As of right now there is now place around with a track man or any assortment of shafts to try. 

Where at?

Whit Smith
CFB Halifax Firefighter

On Feb 1, 2014, at 11:22 AM, "Ryan G" <bounce-ryang102@acushnetgolf.com> wrote:

Team Titleist

Hi,

just had a fitting using Trackman for a set of AP2 714's, tried multiple shafts in the 6 iron (90 mph). DG  S300  launched at 25 degrees with 6000 rpm.  Project x 5.5 launched at 24 degrees with 5400 rpm. KBS C taper  (S) launched at 21-22 degrees with 4800 rpm. Carry distance was 180, 185, 190 in the same order. The C taper is lighter and feels so solid at impact. Can't wait to get them and the snow to go.

You were sent this email because you opted to receive email notifications when someone responded to this forum thread.

View and reply online or reply to this email.

To unsubscribe from this thread, disable notifications here.

The information transmitted is intended only for the
person or entity to which it is addressed and may
contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use
of, or taking of any action in reliance upon, this
information by persons or entities other than the
intended recipient is prohibited. If you received this
in error, please delete the material from any
computer.

Hi,

Out in Calgary. 

Correction for my launch angles. I listed Dynamic loft by mistake. Launch was 21, 20, 17. 

Chris Looking at purchasing a Scotty putter and was wondering one if there is such a thing as a putter fitting and two what does it entail? Really like the Futura Dual Balance.
Chris Considering a club fitting. I purchased a set of AP1's and was considering getting a fitting. How much is it for a set of irons and even a whole set of clubs and what is the process?

Ryan G,

There will be an update to the Wedgeworks program in the upcoming months.  I would keep checking Vokey.com and Team Titleist for further details!

Enjoy your new irons!

Thanks,

Chris