I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

Lou G

My SQ 5H and 7H are go to "can't miss clubs".   I have my persimmon 10W and 34H, and Eye 2 5-7 irons, in reserve but have better distance control with the SQs.  

 

 

I just replaced my Eye 2 8 and 9 irons with AP1 9 and PW (got them used at Golf Mart - same loft as the Eye 2 8 and 9; had the lie angles adjusted R300 shafts and hit the 9 iron almost 140 yards). After all this about how great AP1s are, decided to give the short irons a whirl and I love them! Can't part with my SQ2 26 and 34 hybrid since I am a bit spoiled with them.

My bag is:

 

Driver: Titleist 910 D2 9.5 degrees UST V2 55 Reg.

 

Woods: TM R11 3 & 5 Woods Stock shafts Reg.

 

Hybrids: Cobra Baffler T-Rail 3H & 4H Stock shafts Reg.

 

Irons: TM Burner 2.0 5-PW Stock shafts Reg.

 

Wedge: TM Tp xFT 56/16 KBS Hi-Rev Wedge Flex

 

Putter: TM Raylor Ghost Daytona

 

Ball: Titleist NXT Tour

 

 

tyson w

I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

I personally plan on sticking with the AP1 PW vs buying a 46 Vokey. I tried it and the 48 and didn't like either. I love the 50-08 to death though. I've always used a set PW and that has worked for my purposes.

Lou G

tyson w

I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

I personally plan on sticking with the AP1 PW vs buying a 46 Vokey. I tried it and the 48 and didn't like either. I love the 50-08 to death though. I've always used a set PW and that has worked for my purposes.

Today's bag: Burner 2007 HT draw driver-5W-7W Rescue 2009 4H (I finally caved in and got a 22H) Sumo SQ2 5H and 7H AP1 7,9,P Vokey SM3 50-08 (51), 54-11 (55), 58-04, 62-07 White Hot 7H putter. Would love to get the 8 iron from ebay but, quite frankly, $79 + $10 sh for a used club is too much. In the meantime I have an 8 iron distance shot with both the 7H and 7 iron. I'm getting the same distance out of the AP1 7 iron vs the Eye 2 6 iron I used to have.

r11 10.5 * stiff shaft razr hawk strong 3 wood. Stiff shaft idea super hybrid 19* stiff shaft mp30 irons 4-pw s300 shafts Titleist vokey 50* kbs tour black nickel wedge flex jaws forged vintage wedge 56 bent to 55* s300 Titleist vokey 60* s300 Scotty Cameron California Sonoma putter, 34" bag ( camo) Titleist prov1 and b330 FJ superlights HCP : 11

Lou G

Lou G

tyson w

I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

I personally plan on sticking with the AP1 PW vs buying a 46 Vokey. I tried it and the 48 and didn't like either. I love the 50-08 to death though. I've always used a set PW and that has worked for my purposes.

Today's bag: Burner 2007 HT draw driver-5W-7W Rescue 2009 4H (I finally caved in and got a 22H) Sumo SQ2 5H and 7H AP1 7,9,P Vokey SM3 50-08 (51), 54-11 (55), 58-04, 62-07 White Hot 7H putter. Would love to get the 8 iron from ebay but, quite frankly, $79 + $10 sh for a used club is too much. In the meantime I have an 8 iron distance shot with both the 7H and 7 iron. I'm getting the same distance out of the AP1 7 iron vs the Eye 2 6 iron I used to have.

OK..I got the 8 iron off eBay.

Lou G

Lou G

Lou G

tyson w

I see you and couple others have a 46-48 volkey weges what is the reasoning for not going for the PW in the set of irons .

I personally plan on sticking with the AP1 PW vs buying a 46 Vokey. I tried it and the 48 and didn't like either. I love the 50-08 to death though. I've always used a set PW and that has worked for my purposes.

Today's bag: Burner 2007 HT draw driver-5W-7W Rescue 2009 4H (I finally caved in and got a 22H) Sumo SQ2 5H and 7H AP1 7,9,P Vokey SM3 50-08 (51), 54-11 (55), 58-04, 62-07 White Hot 7H putter. Would love to get the 8 iron from ebay but, quite frankly, $79 + $10 sh for a used club is too much. In the meantime I have an 8 iron distance shot with both the 7H and 7 iron. I'm getting the same distance out of the AP1 7 iron vs the Eye 2 6 iron I used to have.

OK..I got the 8 iron off eBay.

Also picked up the 6 iron at Golf Mart today. So my setup will be: Burner HT Draw driver Burner 7 wood Nike Sumo SQ2 5/26 and 7/34 hybrids AP1 6-PW SM3 wedges Odyssey White Hot 7H putter.

Nice set. Although the hybrid might be ready for an update. First of all it's 24* which is a little much and secondly it's a ladies flex. Here is what is in my bag. Driver: 910 d2 R.I.P 70g x stiff shaft 9.5* c-2 setting(might stitch to a d3 head soon for lower trajectory) 3 wood: 906 f2 proforce v2 86g stiff flex 15* Hybrid: 585h 19* adila stiff shaft Irons: 712 mb (6-pw) cb (3,4,5) project x 6.5 clubs bent 2* flat std length Wedges: 52* sm4, 56 and 60 older spin milled models (c-c) Putter: Scotty Cameron Newport 2.5 35* Ball: Prov1x All grips all multicompounds. Putter grip iomic. HCP: 0-1

I just finished my new bag (after a year of custom fittings and demos):

Driver - Titleist 910 D3, 9.5 degree, Fujikura Motore Speeder Tour Spec 7.2 S with Golf Pride Red Tour Velvet Cord (Project X 7C3 6.5 on original order, I alternate between the two shafts)

Fairway - Titleist 910 F, 13.5 degree, Project X 7C3 6.5 with Golf Pride Red Tour Velvet Cord

Fairway - Titleist 910 F, 17 degree, Project X 7C3 6.5 with Golf Pride Red Tour Velvet Cord

Iron - Titleist 710 MB, 3- 9, Dynamic Gold S300 (Potential switch to S400 or X100 soon), Golf Pride Blue Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 46.08 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 54.08 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 60.10 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Putter - Scotty Cameron Monterey, 34 in

Charn - I too just finished my custom fitting process. Wanted in the worst way to get the 910 D3 Diver but could not get matched with a shaft to keep the ball flight down. The following is what is in my bag:

Driver: I20, 8.5*, Project X Black 6.0, Multi-compound Black/White

Fairway: I20, 5 wood, Digital 17* (1*Strong), 1*open, +1"length (43"),Project X Black 6.0, Multi-compound Black/White

Hybrid: I20, 20*, 1*Strong (19*), 1*open, +1/2"length, Project X Black 6.0, Multi-compound Black/White

Irons: Titleist AP1, 3-GW, 1*Flat, GW 1*Strong, Length +1/4"(all), Project X PXi 5.5, Multi-compound Black/White

Wedges: Vokey SM4 54-11 and 58-09, 2*Flat, +1/4"Length, Project X PXi 5.5, Multi-compound Black/White

Waiting for the Fairway, Hybrids, and wedges. Still experimenting on the putter.

Corrected typo on my Project X shafts

Charn Jivaphaiboonskdi

I just finished my new bag (after a year of custom fittings and demos):

Driver - Titleist 910 D3, 9.5 degree, Fujikura Motore Speeder Tour Spec 7.2 S with Golf Pride Red Tour Velvet Cord (Project X 7C3 6.0 on original order, I alternate between the two shafts)

Fairway - Titleist 910 F, 13.5 degree, Project X 7C3 6.0 with Golf Pride Red Tour Velvet Cord

Fairway - Titleist 910 F, 17 degree, Project X 7C3 6.0 with Golf Pride Red Tour Velvet Cord

Iron - Titleist 710 MB, 3- 9, Dynamic Gold S300 (Potential switch to S400 or X100 soon), Golf Pride Blue Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 46.08 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 54.08 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Wedge - Titleist Bob Vokey Design SM4, Black Nickel, 60.10 degree, Dynamic Gold Tour Issue S400, Golf Pride Red Tour Velvet Cord

Putter - Scotty Cameron Monterey, 34 in