Which Clubs to select..

I am going to switch over to Titleist clubs, from irons to drivers. I play about 6 times a year and shoot in the mid 90's consistantly. Any recommendations on which ones to purchase?  AP1, AP2, Shafts Steel/Graphite , 913 D-2, 913 D-3 drivers? ect ect.

Thanks in advance

Sight unseen, probably the AP1's irons, but we would recommend seeing a good local fitter.  If you can let us know what city you are in, we can give you the name of our recommended fitter in the area.  Or, give us a call at Team Titleist - 1-888-TITLEIST.

Agree with Cathi - always see a fitter if buying new clubs (even for used clubs, for that matter).    You may find yourself carrying a 7 wood, 24 and 27 hybrids and 6-PW irons.   A putter fitting is also critical too.  

I shoot in the mid 80s mainly because my set makeup works for me.  I also shoot  pretty close to par on the exec courses.  

I carry 13* draw driver, 910F 19* (A3), 9 wood, 910H 27*, AP1 7-PW (31-36-41-46), Vokeys (54-11 and 60-10 both 1* strong and 64-07 stock) and a 7H putter.    Quite honestly, I would probably barely break 100 if I went with the conventional 1-3-5 wood, 3H, 4-PW, SW-LW, P setup.   I've had some help with fitters optimizing my setup (I have a local San Diego fitter, Jesse at Fairway Golf, that is my go to person; this got started back in 2009 when I constructed a set of irons, some hybrids and fairways and a lob wedge).   I also have mixed flex in the bag (A flex on the driver and 5 wood, regular flex on the 9 wood-hybrid-irons, and wedge flex on the SM4s); My driver and 910s are shortened considerably (44.5" for the driver and -1" for the others).   My irons are -1/2" (except the PW is 35.5") and bent 1/2* upright.  SW is 1/2* upright and LW & XW are 1* upright.  Putter is 35" and 2* upright.  

Cathy,

 I am in New Orleans Louisiana.

Hi Pete,

We would recommend calling Brian Long and his fitters at TPC of New Orleans.  The number there is: (504) 436.8721 x1

Cathi,

I'm in Canton, Ohio.  Who would you recommend about get fit for the 913 Driver.  Thanks.

Hey Cathi,

Could you recommend a fitter around Ruston Louisiana ZIP: 71270?

Thanks,

Daniel

http://www.titleist.com/golf-club-fitting/ 

 Chris S

Don I am in canton too.  Windmill lakes in Ravenna is having a demo days the end of this month the 25th and 26th which has a titleist staffer there.    

Thanks Bryan, I will check it out.

go with the ap1 graphite really lite when u start shooting in the low 80s switch to lite steel shafts nippon 750s with the driver go with d2 put it on higher loft go with the adila rip there really light and u bust one out there

Don L

Cathi,

I'm in Canton, Ohio.  Who would you recommend about get fit for the 913 Driver.  Thanks.


As Bryan said, Joe Willinger over at Windmill Lakes in Ravenna is our recommended fitter in the area along with Trent Maxwell at Windmill Golf Center.  Keep in mind that a fitting day is not the same as an in depth fitting.  It is like having a "quick fit".  If you are looking for an in depth fitting, give Joe or Trent a call.   

Cathi, who would you recommend in the Wilmington N.C. area ?

Hi Cathi,

Who would you recommend in the Kennett Square PA area? Delaware is near by to! Please let me know as I would like to get fitted!

Thanks so much,

Sean

Daniel A

Hey Cathi,

Could you recommend a fitter around Ruston Louisiana ZIP: 71270?

Thanks,

Daniel

 
Hi Daniel,  We would recommend calling Brad over at Squire Creek CC.  His number is (318) 768.7000