My driver is a 910D2 with a 72 gram, Stiff Flex, Diamana 'ahina.    It also has a white Golf Pride New Decade Multicompound grip.

My SFT setting is A-4.

My fitting experience was great because the Titleist staff were so helpful and working hard to get the right shaft for me.

My 910D2 blows all of the other drivers that I have ever had out of the water.  I'm never going back.

I was fitted by the Titleist rep at the South San Francisco Golf Mart last week. I currently use a TM R9 9.5 Stiff . The rep fit me with the 910 D2 8.5 B-1  setting Kal'li 65 stiff shaft 45"  I would have never picked that club but he said that the numbers looked good . my SS is around 90-94 mph. Anyone else have a similar fitting?

Finally got my 910 D3 in the mail right before Christmas.  Got to go out and hit some balls on the range with it today.  WHAT A FANTASTIC STICK!!!  By far the best driver I have ever hit!  When I was fitted we didn't have an X-Flex Ahina shaft, so the setting changed a little once I recieved the driver.  Went out today and needed a little more loft so I changed mine from A1 to C4.  This thing is a bomb, can't wait to get my hands on the new fairway and hybrids.  I will post a picture of the driver, added a new paintfill to it tonight.

Thanks again Titleist for making the best equipment on the planet!

Elliott Sienicki

Elliott,

Please post a photo of your new paintfill.  I'm going a lot of new paintfill for my son's clubs.  Any good tips on removing the original paint?

--Jerry

Just got fit today at the PGA Center for Learning and Performance down in Port St. Lucie, Fl. Tested with the Pro V1x, the ball I use and my specs came 910D3 9.5 C-1 setting with Ahina 72 X. Great club. Best driver I've ever hit and so soft off the face.  Allows me to take the left side of the golf course out of play with a flat lined trajectory. Best product Titleist has made by far. Ordering it right away. Thanks for such a great product.

Hi guys

I am a newbie on here, so any thoughts you have would be most welcome, i am a 4 handicap and about to go try out the 910 driver tomorrow. SS 104mph ,on trackman, 112mph on vector pro (common calibration probs i think!!) so i will stick with the trackman figures. tried the supertri last summer but no shaft i tried brought the spin numbers down to less than 3000rpm, so was fit into the superfast tp 9.5 with hd6 in stiff but all i am hitting is a high cut!! I don't hit the ball especially high, just mid flight but highish spin, any thoughts what to look out for tomorrow when i try the 910??

Thanks guys

Was fitted for a 910 d3 with a graphite design tour ad di 6 stiff flex shaft. THe head is a 10.5 in the C4 setting. Cant wait for it to arrive and get it on the course!

I too was fit by RC in Austin. He is the best around, make the trip to go see him. I was fitted for a 910 D3 10.5 Kai'li in the C-1 setting. I too was looking for a "anit-left" setting and we found it! This club is a fairway finder for me. I was so pumped, I went back and was fitted for the 910 F in a 17* 'ilima in an A-2 setting. Pretty cool how you can fit each club to meet your personal signature in each swing. I am now officially all Titleist.

Richard G

I was fitted by the Titleist rep at the South San Francisco Golf Mart last week. I currently use a TM R9 9.5 Stiff . The rep fit me with the 910 D2 8.5 B-1  setting Kal'li 65 stiff shaft 45"  I would have never picked that club but he said that the numbers looked good . my SS is around 90-94 mph. Anyone else have a similar fitting?

Took a demo D2 8.5 out to the course and played a round with it and compared it with my TM R9. It was 10 yards on average shorter, but conditions were soft with no roll, all carry. Launch was very low. I ended up purchasing a D2 9.5 with the RIP 60 shaft. I liked the feel better and SS was a tad faster.I had it for about 3 rounds now and drives are 10-15 yards longer than R9 , again all carry in the soft fairways.

I found that the on course play was more accurate than the indoor monitors at the retail store.

just got my D3 monday rip 70 gram X shaft. it is awesome used the 905 S for 5 years tell the face finally cracked and have been toyin with other drivers but they dont come even close to this...the shaft is awesome and the head sounds great!! only thing that could make it better is with the weights included as oppose to buying them separately, not complaining the driver is a 10 with the closest thing to it being a 7.

I go my 910 D3 8.5 with the Titleist Ahina 72 Stiff tipped 1"  I was hitting the 73x Whiteboard in my 905R 9.5 prior.  I live in Colorado and we currently have 5" of snow on the ground.  I need to move to FL!!!  I will update when I get the chance to hit it on the course.  I have a feeling I will be getting a new shaft?? I loved that Whiteboard!! 

I got a chance to get fitted for the 910 and must say I was very impressed and got to see what everyone has been raving about. From my previous driver, my numbers were a lot better and it was a very eye opening experience to see the difference between the 910 and my other driver. I ditched it and am now playing the 910 D2 driver with the Aldila RIP (S) and my setting is A1. I have never gotten fit for any clubs other than my irons and wedges so seeing the difference, I took in my 3 wood and hybrid and sure enough I posted much better numbers and can work the ball and not worry if I am going to hit a strong fade. 

I actually switched from Callaway to Titleist because of these drivers.  I had previously used Titleist in the mid to late 1990's, with a bag of DCI Oversize + Black and 975D driver and DCI Starship metals.  The aesthetics of this driver were what caught my eye but after being tested on a launch monitor and on the range, I was easily convinced to put one into play.  I ended up being fitted for a 910 D3 with Aldila RIP 60 Shaft in Stiff Flex set at A1.  It is going great and can't wait to put the fairway and hybrids into my bag.

Good work Titleist

910 D3, 9.5, RIP (S)

A1

Got my fitting done at Golfsmith and it was a good idea. My numbers were high with my old driver and I had no idea, now I have a great shaft and an awesome driver.

The 910 D3 beats my old driver big time. I can work the ball right to left and left to right now instead of just one way which is a big plus. I love the feel and sound I get with the D3 as well!

I was hitting a TM R7 limited and liked it, so as soon as the R11 came out 2-4-11 i bought one from Dicks Sporting Goods which for some odd reason does not sell Titleist woods so i did not have the luxury to compare the two. Afterwards i took the R11 to an outdoor range and within minutes realized this was a big mistake this was not the club for ME it felt and sounded way to harsh although the white crown head was cool at first it wasn't long i was craving for a sexy black driver so i went in the club house and got a 910D2 10.5 Rip stiff adjusted it to the C3 (high draw) set down and boom just as advertised mid/high draw! Sweet feel and smashing sound of authority extremely comfortable to address at setup very glad to see Titleist has a stock 45" shaft which i believe makes this club so consistently straight and forgiving. I have bagged this Titleist 910D2 winner along side my TM FW, Hybrid and burner irons (i love them to much to even think of switching) and so far they get along just fine. A special thanks to ALL the club manufactures and  especially the R&D departments for making this sport a little easier and enjoyable!

Tom