I've just tried my buddy's 910 FD 13,5 with an project x 8B4(6.5) , because my 910 f 15 was long enough.
I really liked the feel and the distance was really good, but the I felt like could just load the shaft properly with an hard swing.
So what shaft which is less stiff(so a bit more feel),similar spin and similar to a bit higher launch would be could be good for this head ?
Thanks in advance
* My distance wasn't good with my 910 f 15*
It would depend if you like shaft in your 15 degree 910F or not. If you want something similar to Project X 8B4, try the 8C4 (6.0 vs. 6.5) flex.
Try the Ilima by Mitsubishi Rayon Diamana 'ilima x-flex 60g this will get you in the air and help with an outside in swing. You will get more loft and enjoy the feel Promise!
mitsubishi diamana ilima 60g x-flex will give you what you need!
I"m a huge fan of the Blueboard in my 910F.
My first suggestion is to find/ go to a titleist fitting! Everyone's swing is a bit different, i could recommend what i use, but that may not necessarily work for you. There are dedicated fitting centres all over the place (golf courses, training facilities, etc). Places like golfsmith or here in Canada we have "golftown" usually have them 2-3x/year.
when i went for my fitting for my driver, i tried ~10 different shafts i ended up with a stock offereing 60g RIP alpha, 2.9 torque. My SS is ~100-105mph avg occasionally higher, i have a quick tempo and a low/mid launch, and spin rate under 2900 rpm.
again go to a fitting and try out different shafts! i found the project x, and ahina too boardy, while the ilima was to whippy and spun way to much, the kai'li was ok, but the numbers was not as good as the RIP, but this is just my opinion.
hope this helps!
if u have the money ,try out the tour ad dj shaft.imo,all the tour ad shafts are second to none in terms of feel and performance.the dj shaft will provide a higher launch with mid spin.hopw this helps