Performance golf ball fitting focuses on finding the best ball for your game and lowering your score.
Be the first to hear about product introductions, surveys, promotions, and sweepstakes. Through Team Titleist News we will provide exclusive communication not available in any other forum.
Titleist offers the most precise club fitting experience in the game.
The full-set Titleist Golf Club Trial program provides golfers with an easy way to experience Titleist products on either the course or practice tee to help determine the right equipment for their game.
Need to customize headwear, gloves, bags, or golf balls?
Track your stats. Get video tips. Set goals for your golf game.
I wanted to Thank the Titleist Staff for an incredible experience I recently had at their Oceanside Facility. First, Cliff and Robert were excellent hosts the entire day and I appreciated the laughter and deep insights they both provided. Secondly, I thought I would take a moment and share with everyone (I realize many of you have already done this but it was my first time) the wonderful experience as well as the facility is unlike anything I have ever seen before...
From the moment you drive in, you realize you are not in Kansas anymore ! Lol
Here is the front entrance from the parking lot:
The first thing once you walk in the building you notice is a lot of Titleist heritage and technology. To the right is the TPI Performance Studio and to the left you begin seeing lots of Surf Boards. Note the one below hanging from the ceiling... The TPI Studio is literally a full service gym with studio lights and camera's!
So after a quick tour it was fun to be able to see what unique facility I had in front of me. My fitter for the day was Cliff and we walked out to the range which on the left hand side which has a Par 4 mock up that is about 440 yards long. Trees lining each side with a beautiful ocean view past the green (albeit in the distance). Sand traps not only beside the green but also along the fairway so one can imagine cuts, draws and working to fly the ball past each one. It was about 280-300 to fly the traps in the fairway by the way!
The center of the facility has a short game test area that allows the visitor to test one's skills by measuring your misses in inches...Next to the short game test area is the wedge/iron range which has a lot of flags and banners so a person can dial in their distances from 20 to 250 yards...very cool. This is where we spend the first part of the day. Then on the right side of the facility is a multi use practice area with greens for putting, approach shots, mock holes etc... this was one of the most impressive practice/test facilities I have ever seen! BTW, the right side of the facility is where they do a lot of golf ball testing, in fact the day I was there, they were testing some new balls...do not ask for specifics since I did not get close to the building but you could see the balls shooting out simulating drives!
Here is a pic of the right side of the facility:
Picture of the Short Game Test Area:
So as Cliff and I approached the center section of the facility I could sense adrenaline rushing through my veins! I was actually going to get fit where the pros do! How cool could that be! So we discussed how I was not to take divots one along side another but rather hit them all over the place like some golfers like do on the range....it was very hard to do this, I am used to making a square or rectangle shape like most of you with my divots so I had to break the habit...oh well, old habits need to be broken when at the Oceanside Facility! I guess the grass there is a special blend, as you would guess, that grows back quicker this way. You could see how divots taken just the other day were barely noticeable...
I tell Cliff a few minutes later that I am warmed up and then I moved over a few feet in front of Trackman and the day officially began with shots from my current irons. Then a steady stream of various new irons were handed to me as Cliff and his associate Robert started bending lie angles, changing shaft material and weights and of course varying the swing weights and lengths of clubs. Surprisingly after all this movement it was apparent that I was still a DG X100 guy but the Modus 130 Steel Shafts were very comfortable to me also. I think moving away from DG X100 will be very hard after playing with them for almost 30+ years.
By the way, Cliff asked me what type of golf balls I play with, I mentioned how I have enjoy the ProV1x and he grabbed a couple full shag bags numbered with 1's with a circle around the number in blue. I asked him what this was about and he said they have four different types of balls here (outside of the unique tour balls for tour players that are not for mass distribution) ProV1x and ProV1...no surprise however they separate the balls for iron/woods and for wedges. The replace the iron/woods balls twice a year while the wedges are replaced four times per year. Can you imagine having fresh range balls four times a year! OMG!
Here is a picture of the area we were hitting irons from in the center section:
Here is Cliff and a sampling of just SOME of the irons I was hitting:
Picture of more irons and the truck with loft and lie bending machine along with rulers etc..etc... just amazing!
Yes, they even have Titleist Tees of all lengths and configurations just for their fitting sessions! LOL
So after about a couple hours we shifted to the hybrids and finished there. Interesting, we discovered that I should construct my bag in configurations in this area. The first is for courses with long par threes to carry a 4 iron and a 2/3 iron replacement hybrid (913Hd 20 degrees). It was interesting when hitting the hybrids they had the infamous GD orange shafts but they did not feel or perform different for me compared to the Phenom HYB TX 100 which is considered standard stock! The other configuration we came up with is to replace the 4 iron and hybrid with two new hybrids for longer courses that have killer length par 3's and par 5's where I would play no 4 iron but rather a 23 degree 913Hd and 18 degree 913hd. So now I have two set ups going forward...very useful!
By the way during this time, we played with ProV1x and ProV1 balls checking spins, landing angles and noticed that despite my high swing speed I actually may be a better candidate for the ProV1 (not the x version!)...just goes to show how there are no absolutes this process!
Next, we then moved over to the left side of the range to the mock Par 4 hole and we concentrated on Fairway Woods and Drivers.
Picture of me discussing woods trackman data along with shafts galore behind us!
Picture of the shafts they picked for me to try...Wow!:
It was interesting relative to my driver that currently I was fitted for a 10.5 degree 913 D2 Driver with a Pro Force V2 X-Stiff shaft but as we got into the details it appears while if I hit is square it went a million miles however if I miss hit on the toe or heel the distance loss was significant...we shifted over to a 8.5 degree 913 D2 with a new Fuel X-Stiff Shaft and while the golf ball when struck square went the same distance as my current gamer when mishit it went the same distance almost! Amazing, I was striking, and mis-striking, balls that were all going similar distances! Technology Wow!
They confirmed that my current 913Fd 13.5 degree Fairway wood was perfect for me however they starting playing with shafts and when I went to the Matrix Ozik Black Tie Shaft. Wow, my shots were tighter relative to dispersion and the ball never felt so incredible coming off the club face. Again, amazing to be able to hit all sorts of various shafts in X-Stiff and heavier just for my type of swing.
We ran into lunch time and took a short break, there are a lot of restaurants just down the street so grabbing something quick was easy.
After lunch I was waiting in the lobby and look who walked in! Bob Vokey...Cliff introduced me and you could immediately tell that this was no ordinary man! Immediately we started joking and laughing...I sensed the afternoon would be very fun and special.
We walked down the hallway to a transport vehicle which took us to the backside of the center area of the facility. Basically, the other end where I did my iron testing. There waiting for us was about, or at least seemed, bags and bags and bags of wedges...every type one could imagine.
Picture of Bob and Myself:
We started off working on the gap wedge checking out my full yardages...Bob, Cliff and Robert were all there but Bob and I were interacting one on one though...Bob mentioned I was the 7th person to come through the Vokey Experience thus far on the amateur side. Bob was sharing experiences of how he works with players (all the names you would expect from the PGA Tour) to make their wedges better than what they are playing with just by the grinds...reading between the lines you could sense that he interprets and watches how I hit balls...what is easy and what is hard by varying the lies...tight, rough, soft, firm...etc... yes they have them all! We narrowed it down to the SM4 line for the gap wedge with the 12 degree bounce model. I was calling out distances that I need to hit and then by adjusting the lie we would discuss with various wedges how comfortable or hard a shot was based upon the grind of the club. We agreed by adjusting it to 10 degrees of bounce but keeping the face square that was an ideal combination for my game. We then shifted to the sand wedge (I carry four wedges; PW, GW, SW, and LW) and began the same process over. Bob began by telling me a story of how they were grinding a wedge and it took a long time but came out perfect...his assistant said..."That was a M.F.!" ... Bob said yes it is, "My Favorite", course he was referring to a popular TVD M Grind. But the M.F. did not turn out to be really My Favorite but another popular expression you can figure out...!
So after Bob arrived at decisions on the GW and SW the real fun began. He escorted me over to the green on the mock Par 4 and I hit 50 yard shots to various pins. He initially picked a hard tucked pin behind a bunker and I asked ... "Hey, Bob how about a little love...that is a hard pin!"...he replied jokingly and laughing...thats what we are here to do, Work! The entire time we were fitting for wedges, jokes, more laughter and a light fun aurora was all around us. I can honestly say it will be a highlight for the rest of my life that I will Never Forget. Of course, I hit LW's out of different types of bunkers, green side situations such as rough, tight lies etc... We arrived at two wedges for me to carry going forward, if I am at a firm, tight course like in Arizona or Texas the E Grind was perfect for me with a thinning of the top line of the wedge. For softer courses maybe in the midwest, the V Grind (which is what Bob as his personal gamer) wedge would be my choice. So going forward like the Hybrids, for wedges I have a couple options depending on the course type.
Overall, spectacular experience...I hope you have enjoy reading about my day and I cannot believe the memories I have gained and of course (in my mind) a new friend out of the process! If you get a chance, take advantage of it, you will not regret it. Those of you that have done it already know how cool it is!
How much did this cost you, and how long in advance did you book this?
In the Jonzone
How much did this cost you, and how long in advance did you book this?
I will PM you.
I really enjoyed reading about your fitting ! What an amazing experience, sounds absolutely amazing - this has been added to my bucket list!
Very cool Chris!! Appreciate the review/story of the day.
Would LOVE to meet Bob and get fit for wedges!!
How much did you pay for that? How many days? Tks
Chris, what a great day! Glad you enjoyed yourself and thanks for posting for all of us to see. A little vicarious thrill! Well done.
Thanks for sharing!