November 22, 2012 By dave b
what is the swing weight of a 913 d3 9.5* driver with the stiff flex diamana 72 + shaft at 45 in length. mine came with the red dot weight .
November 22, 2012 at 7:22pm
D4 maybe. I have the same shaft in 910 D2 and it comes in at D4.
November 27, 2012 at 11:24am
The red dot indicates a 9g bezel weight. There are 5 bezel weight options to help adjust swing weight (4g-white, 7g-green, 9g-red, 11g-blue, 14g-black).
June 18, 2013 at 9:28pm
Both my new 913 D2, 9.5 and my 17F have red dots with std lenght shafts. By shortening them both by 1/2 inch will reduce swing weight. What new weight will need to be added to resotre original swing weight? Please indicate color amd weight.
Thanks Jeff M
June 19, 2013 at 10:18am
Both of those metal woods will need the 14g bezel weight (black dot).
June 19, 2013 at 1:40pm
Does the shaft brand make a difference? I have the 913D2 with the Bassara 50 Hi regular flex, with the red dot weight. I want to have it cut down one inch. Would the black dot weight be the right one for me to install to keep a similar swing weight?
June 20, 2013 at 4:30pm
The black dot (14g) bezel weight won't get it back to a standard swing weight, but will be your closest option.
June 24, 2013 at 7:40pm
Both of those metal woods will need the 14g bezel weight (black
were sent this email because you opted to receive email notifications when
someone responded to this forum thread.
and reply online or reply to this email.
unsubscribe from this thread, disable notifications here.
The information transmitted is intended only for the
person or entity to which it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited. If
you received this in error, please delete the material from any
June 25, 2013 at 10:08am
They are tipped the same and butt cut for length.
June 30, 2013 at 8:08pm
Can you explain 913d, F & hb face angle (open, neutral, or closed) in the A-1 setting and what happens to it as you move left and right on the fitting chart?? I am interested in decreasing lie angle and wanted to understand what happens to face angle.
July 2, 2013 at 11:58am
In A-1, for all Titleist metal woods, the face angle is .5* open. When you adjust the lie angle upright or flat (move left or right on the Surefit Performance Guide) the face angle does not change. We have found from our testing that when you adjust the lie angle, you will begin to see a change in curvature of the ball flight. For example, setting the driver in a flat setting will promote more of a fade. The only time that you effectively change the face angle is when you add or decrease loft.
Let me know if you have any other questions on this topic.
July 2, 2013 at 7:01pm
In A-1, for all Titleist metal woods, the face angle is .5* open.
When you adjust the lie angle upright or flat (move left or right on
the Surefit Performance Guide) the face angle does not change. We
have found from our testing that when you adjust the lie angle, you will
begin to see a change in curvature of the ball flight. For example,
setting the driver in a flat setting will promote more of a fade.
The only time that you effectively change the face angle is when you
add or decrease loft.
July 4, 2013 at 12:40pm
Driver No. 1 is a stock Titleist 910 D2 (10.5) with a 72 gram shaft.
Driver No. 2 is a stock Titleist 910 D2 (10.5) with a 62 gram shaft.
Assume that the weights of all components of both clubs are perfectly at target specs.
If you put the head from Driver No. 2 on the 72 gram shaft, what would the swing weight of that club be? How much would you have to butt trim the shaft in order to bring it down to the standard OEM swing weight?
Just curious. Thanks.
July 8, 2013 at 11:01am
Both drivers should come standard with a 7g bezel weight in the head. The driver with the 72g shaft will swing weight out at D4 and the driver with the 62g shaft will swing weight out to D3. I wouldn't necessarily recommend changing the length of the shaft to reduce the swing weight, since it is only one point and the length difference could have a negative impact on your consistency. If length was something that you really wanted to change, then taking just under a 1/4" an inch off the shaft would bring you back to a the D3 swing wight.
July 10, 2013 at 10:14pm
Going to the B1 setting (Flat) worked great in my FW & HB. When i went to B1 in my driver i saw the fade but liked the added distnce and the way the club addressed the ball. If i go to the C4 (flat with more loft) will that close the face (and how much) and counteract the fade? I didn't think of it at the range and when thinking of your response later iwanted to ask ??
Thanks Jeff M.
July 23, 2013 at 7:59pm
Did you see my last question above. I am anxious to hear from you.
Haven't registered for Team Titleist yet?
Yesterday at 4:08pm
@Titleist Brand Ambassador @JustinThomas34 has been stamping "RADAR" on his wedges since he was 9 years old. Custom stamp your own #SM6 Raw through #WedgeWorks with the link in our profile.
Yesterday at 5:15pm
Scotty Cameron Tour Rat I Masterful Tour Putter in Chromatic Bronze. #comingsoon #scottycamerongolfgallery #scottycameron #theartofputting #circlet
23 hours ago
Thank you Titleist for the new gear. Can't wait to play it! #pga #golf #teamtitleist #titleist
My wife is awesome! Gave me this gift that combines 3 of my favs. @RamsNFL , @EricDickerson and @Titleist Pro V1s https://t.co/S4TkdphL8e
@Titleist 4 great sounds, 4 fairways hit #teamtitleist #proinfluence @SCCtheFUNclub #917 #915 #913 https://t.co/ZOhMLWCjbh
Number 10 at Echelon Golf Club in Alpharetta. #TeamTitleist https://t.co/UlMjVaNdb1