Screws for sure-fit 910 clubs adaptor

Rob B
Rob B post: 16 Nov 2011 2:05 PM

The screws in my 910D2 driver and my 910 3 wood have broken. Where can I get a replacement screws and washers. I only adjusted the setting 9 or 10 times.

Rob B.

Cathi, Titleist Club Concierge
Team Titleist Club Concierge Titleist Staff Member TPI Certified
Cathi, Titleist Club Concierge post: 17 Nov 2011 2:44 PM
Hi Rob, Give us a call with your serial numbers at 1-888-TITLEIST

Cathi @TeamTitleist
1-888-TITLEIST

Rob B
Rob B post: 17 Nov 2011 5:01 PM
Cathi, thank you for your reply, I will call you this afternoon with serial numbers Thanks again Rob You do not have to reply to this email
Rob B
Rob B post: 29 Nov 2011 4:23 PM
Cathi, I received the screws for the D2 driver and 3 wood and would like to thank you and Titleist for your continued support. Once again, I am convinced that Titleist produces the best golf equipment. I am thinking about replacing my 710 AP1 irons with the new 712's.I am a 17 handicap and would love to try the forged AP2's.Is the new forgiveness in the 712 AP2's suited for a 17 HDCP or should I stick with the 712 AP1's. Thanks again for your continued support. Rob B
Cathi, Titleist Club Concierge
Team Titleist Club Concierge Titleist Staff Member TPI Certified
Cathi, Titleist Club Concierge post: 29 Nov 2011 6:09 PM
It would depend on your ball striking. If you are a 17 because your short game and putting are holding you back and/or you are working on your game, the AP2's could be just fine. If you want more forgiveness, the AP1's have about 5% higher MOI than the AP2's. I would go to your local fitter and hit them both from different lies and see what you think. Also, make sure you have the same shaft in both heads so that the only difference is the head.

Cathi @TeamTitleist
1-888-TITLEIST