February 10, 2013 By 808HACKER
Any ideas as to what kind of a tool I need to stamp my own letters into my vokeys?
February 11, 2013 at 3:27am
36 piece 1/8" steel letter/number stamping set. U can find em for around 10 bucks. Get some strong two sided tape and tape the face to a sturdy work bench, grab ya a heavy hammer and get to work. I'd experiment with and old wedge if you have one first though just to get comfortable doing it.
February 11, 2013 at 8:03am
You have a few options:
1. You can send them in to Wedgeworks for their wedge services.
2. If you're wanting to DIY, 1/8" is typically used for the stamping. The Tour Van uses Young Brothers stamps (sharper better stamps). I made the mistake of buying cheaper stamps to do my wedges. Then use Elmer's paint pens and fill the stamping, then wipe with acetone on paper towel
Stamping/painting is the only thing I'll try on my own. If I need anything else done on one of my Vokeys... they are headed for Wedgeworks!
February 11, 2013 at 9:51am
If you go the DIY route, practice on a club you don't care about until you get it right. It may seem simple, but there's a bit of technique involved.
March 14, 2013 at 1:36pm
Tried doing my own wedge works... Painting was no problem. The stamping is tricky... Good thing I practiced first on an old oil can Vokey. They seem to be harder metal...
March 27, 2013 at 5:50pm
Did some more wedge working. Now this is the real thing, current wedges SM4 48*, 52* and 58*
July 14, 2014 at 9:24pm
What size/model/manufacturer stamps did you use there? My feeling is that 1/8" is too small and that 3/16" is too big! But it looks like you got something in the middle.
July 15, 2014 at 5:46am
Haven't registered for Team Titleist yet?