Golf Clubs - Recent Threads

Wedge Stamping

Zachary W — Fri, 26 Jun 2026 21:20:46 GMT

Recently got fitted for my new SM11s and I wanted to make one of my favorite clubs a little more special. As a kid I was notorious for touching and often breaking things at my grand parent’s house. My antics were often was followed by my grandpa’s famous phrase “tear it up… just tear it up”. Hopefully I can keep his spirit alive with the stamping and add some new memories to the phrase.

www.titleist.com/.../m68blqc4t0wv9oqp4aof

GTS2 Numbers

David — Fri, 26 Jun 2026 17:22:52 GMT

Update...put the GTS2 to the real world test last night...played 14 holes..hit 9/11 fairways...and the 2 fairways I missed were at the end as was tired...so accuracy is a+...real world distance was better than my launch monitor numbers...250 ish on average and one at 260....the accuracy is what really captured my attention..the sound is also leveled up...it really is a point and shoot club..played a prov1x ball...I'm sure I can find a ball that would give me more distance and feel as good as the prove so please looking for ball recommendations...bottom line the club is legit and the setup GTS2- 9* 45" ventus velocore+ red S6 with the A1 adapter setting is for me. I also went with the 11gram weight in back and the 5 gram in front...I just hope I can improve on these numbers after my rotator cuff surgery...If you are on the fence I verify it is worth it...Ok for this 65 yr old...LOL

www.titleist.com/.../nle20qhlexvyqi0xa2hr

Damaged Driver

Mason D — Fri, 26 Jun 2026 11:34:04 GMT

The top aspect of my driver head has a bend in the metal. I assume this is the face beginning to “cave in” from the amount of swings put through.

Does anyone know what I can do?

GT1 fairway woods

CGriffin — Thu, 25 Jun 2026 13:45:33 GMT

Last year, when I did my T series iron fitting, I also ordered a GT1 24 degree fairway wood and it's been an excellent fairway wood for me.

I know that there may be new GTS-1 woods sometime in the next few months but with the price reduction to $329, I just decided to order a new GT1 21 degree fairway wood to replace an old png 7 wood. Can't wait for it to arrive (6 weeks before delivery, which is a bummer).

Now I can't help thinking about upgrading my TSR driver ...

GTS 2 Fitting

Hugh H — Thu, 25 Jun 2026 00:01:30 GMT

Would like to say I know how the new driver hits, but, I got fitted on May 30 and ordered driver through the Titlest rep, but, still have not received. Pretty sad that I could got to any of my local Golf Stores and get the exact driver I was fitted for, but, Titlest cannot ship to me yet. Very disappointed in this experience.

New Toys

SDawson — Wed, 24 Jun 2026 22:39:54 GMT

Just delivered today and can’t wait to play with them tommorrow. They are T250’s with VA Composite Raijin 2 Shafts. I was fitted for them when I hit the club during the fitting the ball flew nice and high and touched Titleist 3D’s. Distance, Dispersion and Decent. Another great engineered product by Titleist.

www.titleist.com/.../jyttork9dnky3f2l1piy www.titleist.com/.../imgaqbscfsvs1amy6yvg

Blend set

Adam S — Wed, 24 Jun 2026 19:10:26 GMT

Going to blend a t100/t150 set at the 6/7 iron. Plan is to:

have the t100's one degree strong for the blend. question: PW would be 44 and AW would be 48. Has anyone then gone 52-56-60 after that? Just can't imagine not having 4* difference in the scoring clubs. ( I plan on not getting a 4 iron)

Thank!

Driver fitting for older drivers?

Jay C — Sun, 21 Jun 2026 15:39:09 GMT

I know this might sound a bit sacrilegious posting this right after the GTS release....but I'm wondering has anyone done a fitting with a Titleist rep for the current model driver, then taken the head/shaft specs and gone and sourced out something similar from a previous model or two? For example get fitted for a GTS but then go and find a comparable GT or even TSR? As much as I'd love to upgrade to a GTS...even factoring in the fitting fee the savings could potentially go towards a couple of new Vokey wedges in addition to adding a new driver to the bag

It seems like it's easy to find lots of good condition used heads and shafts, but just not the fitting component to go along with it unless you live near a 2nd Swing location.

GT280 Mini and TSi

David C — Thu, 18 Jun 2026 20:29:26 GMT

Over the years I have mostly played png drivers, Fairway metals, and hybrids. I have owned several Titleist fairway metals and had nice results with the 909F and 913lF. I had a Tiitleist Hybrid too after having success with the png G25. I had two separate bags for years, one I kept at our vacation home that we owned for almost 20 years. I have had Titleist MB irons since 2012 and played Vokey wedges for many years too. I just couldn't justify the expense of the Titleist driver and had so much success with my png i20 driver, fairway metals, and hybrids. I have always preferred smaller heads on my metals so when the GT280 Mini hit the market, I got tempted, but they were so much more money and I hit my png i20 so well. I had an opportunity to purchase a TSi fairway metal for my brother when I was visiting. I bought as a demo discount. I knew the shaft was too much flex for my brother, but I thought I would send him the stiff shaft from my 913F. I hit it before I purchased it and it felt very nice. Long story, made short, my brother never used the club and he mailed it to me for my birthday last year. I swapped to the shaft from the 913F and found it a great club off the tee on holes that required some precision targeting from the tee box and occasionally from the fairway on longer holes if I was trying to cover trouble or make up ground after a poorer drive. I also knew it was designed for use in the rough too. I loved it. I then followed up and bought a GT280 Mini and married it to a low flighted shaft. I tried the GT280 using the shaft from my 913F, but the flight was too high for me. I had played a png G2 7 degree or a png i20 8.5 degree driver for years. After getting the correct Titleist tip installed and using it last fall and now this spring, I am sold on both the TSi and the GT280 Mini. Very consistent and even though I give up a bit on length on my GT280 Mini drives, I get better misses. I love the sound of both clubs because I realize that they sound more like my old Persimmon gear from some 50 years ago.

C-16

Jeff D — Sun, 14 Jun 2026 17:28:52 GMT

Would it make sense to re-shaft my C-16’s that are about 10 years old?

GTS3 Sliding Weight Cover

Scott A — Fri, 12 Jun 2026 00:33:31 GMT

Hi everyone. I just bought a GTS3 driver and I was trying to open the sliding weight cover and one of the tabs got stuck. I messed with it for a while and ended up breaking one of the tabs and messing up the screw.

Does anyone know where I can get a replacement cover and screw?

www.titleist.com/.../pvta2s25yhrtkctyoutj www.titleist.com/.../rv1ugsq2hurgzl3u1rn1

Thank You Everyone Buying GTS Drivers!!

J22abe — Thu, 11 Jun 2026 21:58:34 GMT

...because of all of you I'm finally back in a Titleist Driver.

(No, you will never get me in a Scotty over my putter!!! NEVAH!)

www.titleist.com/.../kfkq1wzg0mvgjvmzfs8e

GTS delivery time

craig t — Thu, 11 Jun 2026 18:21:18 GMT

So I went for my fitting for GTS driver and fairway woods. Ended up ordering GTS4 driver, GTS2 3 wood, GTS3 5 and 7 wood. Ordered 3 weeks now and still no sign, see shops now have them in, a bit gutted not to have received them yet. Anyone else finding the same?

GTS driver

jbryant — Thu, 11 Jun 2026 13:34:22 GMT

After Titleist fitting I changed to the new GTS with an Ultra shaft. I am a 77 Y O 14 handicap player and gain 15 to 20 yards of fthe tee. Just as or more accurate them my old TM 2 year old driver. Very happy with the purchase. John B

When to switch to hybrids

Eric B — Thu, 11 Jun 2026 13:22:54 GMT

Aging (50) has me considering getting rid of the traditional 3 and 4 iron. I have been playing a hybrid for these clubs and I really like it. Just kind of stings a little when you make the switch. I hit the hybrid much better though. Pride goes out the window if I save a few shots on the course.

3 wood

Jun Sung P — Wed, 10 Jun 2026 15:05:33 GMT

I've been hitting my G425 lst 3 wood for years and every year I want to change it to a titleist I just can't seem to find one that I feel comfortable with for some reason, and its honestly not sure what to do cause the 3 wood I have is getting kinda old

GTS hybrids

Tue, 09 Jun 2026 01:43:14 GMT

When will new hybrids be out ?

GTS2’s Have arrived!!

Mike r — Fri, 05 Jun 2026 14:10:52 GMT

It's been 10 years since I have been fit. I am so happy with fitting, live the ball flight and extra distance. I hit the GTS2 driver with 10 degree head and i love the higher launch angle. I also received a GTS2 16.5 degree fairway wood and the ball comes off the face like a missle. Thanks Titleist for the great fitting and experience. #TeamTitleis

www.titleist.com/.../wf18tdxcioxxx1zquiac www.titleist.com/.../jfapdvwayiitflicrjxr www.titleist.com/.../bgjbg1ezsjnxqqnrfj4t

My mew T250’s!!

LGuzman — Thu, 04 Jun 2026 17:37:11 GMT

Got fitted with Adam Lash at Breakers West a couple of weeks ago. Incredible experience with all of his fitting knowledge and techniques.

Just got them this morning and I can’t wait to try them out! Definitely taking them to Casa de Campo next week!!

www.titleist.com/.../dctr2cene7pdugep2tly

620MB PW/ Vokey GW Transition

GDua — Thu, 04 Jun 2026 16:00:29 GMT

Hey Team Titleist. Been gaming a set of srxn ZX7 for a handful of years and looking to get back into some more traditional blades. ZX7 are fine but they're a bit chunky for my liking (particularly in the short irons) and launch a bit high -- I've always struggled in the wind and prefer something that helps me flight the ball like a blade.

My questions is related to the blade length of the 620MB PW. I've always played a set PW vs. a Vokey, and I know the 620s obviously have a compact look, but one thing that drives me nuts is when the set PW is way shorter heal to toe than my GW (I play a Vokey 52). Just feels odd for the profile to get smaller as I transition up the bag.

Anyone gaming 620MBs and a Vokey GW and have any insight into the size comparison? I'd imagine Titleist has thought of this but wanted to confirm before pulling the trigger. Thanks!

New Driver

Alan p — Thu, 04 Jun 2026 11:51:15 GMT

Had a message yesterday from precision golf in surrey, UK that my new GTS2 is ready for collection, cannot wait to get it out on the course.

T100 custom order came in at D0 & C9 swing weight

richard a — Wed, 03 Jun 2026 23:50:22 GMT

I’ve been playing and building clubs for a long time, and in my experience a standard swing weight for a player’s iron set is typically around D2.

About a month ago I received a custom set of T100 irons with Modus Tour 120 Stiff shafts, standard length. The entire set measured approximately D0.

I also ordered a custom U•250 Utility Iron with a Graphite Design DI-105 shaft. It arrived at C9.

I reached out to Titleist Customer Service because both orders seemed noticeably lighter than expected. Their response was:

“The Utility iron is targeted at D0, but the lightest it can go is C9 and the heaviest is D1. So, it is calculated within the threshold.”

I understand there are manufacturing tolerances and that different shafts and grips can influence swing weight. However, I was surprised that a custom order could arrive at the absolute bottom end of the allowable range and still be considered fully within spec.

Has anyone else experienced this with recent custom Titleist orders? I’d also be interested to hear from someone at Titleist regarding what swing weight target is typically used for T100 irons with Modus 120 shafts and whether D0 would be considered normal for that build.

I’ve always had great experiences with Titleist products, which is why this response was a bit disappointing.

T200 Real or Fake

Kyle V — Tue, 02 Jun 2026 23:38:05 GMT

I just bought these Titleist second hand and there are some red flags- the quality seems off - the back plates feel loose (not what I would expect from Titleist) and I was looking for the serial number. It looks like the font is off and it’s on the 7i. Can anyone help? Thanks!

www.titleist.com/.../i95f6nzehsca0ztwm9hj www.titleist.com/.../kqmeswuad37hvcnqe9rm www.titleist.com/.../njl07vazshbphcsfhzqk

Fake GT2? How can I find out if I purchased a fake?

BRIAN B — Tue, 02 Jun 2026 12:38:19 GMT

Just purchased a used Titleist GT2 Driver from a PGA professional online (I checked his credentials) but still have a sinking feeling I purchased a fake/dupe. Is there a contact e-mail, phone number, online portal I can use to find out and confirm if it is fake or not?

Best Starter clubs

Ronald D — Sat, 30 May 2026 13:43:35 GMT

What would be the best clubs to get as a starter