Hi GTi 3: What setting are you i with the driver?
Morten, We do have lighter heads we can use, but that is only getting you a +/- 1 swing weight point. Figure you add 6 swing weight points with the +1" and you will only get 2 of those points back by using the D...
Well done keep it up guys
Thank you for the answer! I thought Titleist could use some lighter heads to keep the swing weight down and make them D2 or maybe D3?? I have a friend that has the AP2 712 with Project X 6,5 + 1 inch and midsize To...
Hi Bryce, I think you've got some excellent advice from TT members here - I just want to add that Jim McLean's "The 8 Step Swing" is an excellent book that, in my opinion, is essential reading if yo...
I played 18 holes with each type of ball, alternating the front and back with each ball on my home course. Both balls showed similar distance off the driver, with a very slight edge going to the NXT Tour. However there...
Although I have a post floating, I am pleased to let one know that I shortened my driver to 44.5" (had been using one of that length until 2011 and was adamant about shortening my Burner HT Draw from 45" beca...
In a related subject, I have been using a 44.5" driver since 2007. Titleist is pretty easy to accomodate, given their shaft lengths are 45": I use a Winn Excel RF oversize grip and that restores the swingweig...
I never quite understood the need for wedge specific shafts. Especially when most people have their PW with a shaft separate from their SW/LW. I always get my wedges re-shafted to match what I play with in my irons. To...
I also wanted to see if there was a way to make the x-strap system a single strap system.
Are you looking at the real Ahina or the Titleist version? The project X is a great shaft combination with the Titleist drivers and should be a good option for you. It's very stable and would bring some consistency...
If the new drivers come out in the fall, do we know yet if the current Surefit adapter will work in the new drivers?
Hi Jake, Have you fitter call us at Team Titleist or give us a call and we can recommend a fitter with shafts that will be able to help you. The PX black (in our robot testing) had a softer tip than the Ahina, but we d...
I agree with Ken that you need to have it fitted. That includes length and it may be a simple adjustment. Theoretically, too long of a club will cause a pull or hook and too short of a club will cause a push or slice...
It is something they could possibly do, but they would have to take the set apart to see what heads were used. It depends on the shaft, length and grip. There would be a charge to do that and you should check with your...
As fan of KBS and fitting in general, I like to keep players in the same branded shaft for irons and wedges. I certainly think a move to KBS in the wedges would be fun! You should also consider the black nickel (becaus...
