Hi Ricky,

I was fitted for the TS3 Driver and Fairway wood about 5 mos ago. The TS3 15 degree was significantly longer (Trackman proved this) than my 15 degree 917F. Because I didn't want a ton of extra distance in the fairway wood, my fitter had me play around with the 16.5. In the end, that is what we settled on as I was getting very similar distances to my 15 degree 917F2. Having said that, I only pulled the trigger on the driver and have yet to order the 16.5, so I don't have any on-course experience with it. Nor do I recall the exact Trackman #'s. Nevertheless, I hope this helps somewhat.

I use an 18 after my 915 7W (21 degrees). I also have a 16.5 for my go-to 200 yard off the tee box for par 3's over 190 yards (limit of my 5W) and a couple of holes I play were 200 yards is at the crook of a 90 degree hole with tall trees blocking the corner. I have issues with the length of the 16.5 stock shaft off the deck so with the 16.5 being able to be dialed from 15.75 to 18, using a 5W length shaft is alternative to not getting enough gap from an 18 w/o making it harder to hit.

Thanks for that guys, I'm leaning towards the 16.5 I think. Will let you know how the fitting goes.

Well I was fitted last night. 16.5 TS2 0.5" shorter. Very tight dispersion and still some impressive numbers.

Great results, Ricky. I too was fit for the TS2 16.5 and picked it up last week. It is a fantastic addition to my bag. Checked all the boxes.....height, dispersion, distance.